top of page
Generously welded electro-steel structure
sized to guarantee the machine great rigidity.
The type is with a double hydraulic cylinder to control the descent of the ram.
The mechanical work on the structure is carried out after welding
components, in order to guarantee further precision
The synchronization of the descent is guaranteed by the compensation valves.
The entire management of the descent of the beam, the bend angle, the back registers and the
crowning cylinders is entrusted to numerical control
Standard equipment
4+1 axis control (Y1-Y2-X-R+V)
Double cylinder structure
CNC Delem DA 53T
Electro-mechanical crowning
Bosch Rexroth electro-hydraulic valve (Germany)
GIVI magnetic scales (Italy)
DELTA servomotors
Shneider components
Siemens main engine
SUNNY pump (USA)
EMB hydraulics (Germany)
German bark and seals
Fractional upper tool
Lower tool
Quick tool change
Front sheet metal support
Movable pedal board
3-beam laser safe
Workforce 130 Tons
Folding length 3200 mm
Distance between uprights 2700 mm
Total opening 440 mm
Side recess 400 mm
Boom stroke 180 mm
Rear register stroke 600 mm
Register speed 250 mm/s
Precision 0.02mm
Worktop height 820 mm
Main engine power 7.5KW
Oil capacity 380 L
Approach speed 110 mm/s
Working speed 10 mm/s
Return speed 90 mm/s
Machine weight 9,000 kg
Overall dimensions of the machinery L mm 4,250 x l 1,800 x h 2,580 mm
The CNC control automatically calculates the bending angle, guaranteeing speed of use with the least number of steps and precision of execution
High brightness color LCD
- Large 10.1 TFT screen
- LED back lighting
- Resolution 1024x600 pixels
- Industrial touch screen
- 1GB memory capacity
- Data backup via USB
- Integrated valve amplifier
- Power off memory
- Profile-53TL offline software
4+1 axis control (Y1-Y2-X-R+V)
The machine is equipped with a crowning system for
compensation of the natural flexion of the board during
the folding operation.
The crowning takes place via an electro-curing table.
mechanics managed automatically by numerical control
as V axis.
For safety and convenience of processing
the machine is supplied with the devices
Three beam DSP Laser safety. This
class IV device, allows you to work
in maximum safety, but with
great ease of use.
bottom of page